Carbon Monoxide Alarms
What are CO alarms?
Household CO alarms measure how much CO has accumulated.
Currently, CO alarms sound when the concentration of CO in
the air corresponds to 10% COHb level in the blood. Since
10% COHb is at the very low end of CO poisoning, the alarm
may sound before people feel particularly sick. Most CO alarms
now have silence/reset buttons and must be immune to elevated
ambient levels such as those found in urban areas.
Do I need a CO alarm?
NFPA 720, Recommended Practice for the Installation of Household
Carbon Monoxide (CO) Warning Equipment, 1998 Edition, recommends
installing a CO alarm in households containing a fuel-burning
appliance, fireplace, or in those having an attached garage.
What causes CO nuisance alarms?
Pollution and atmospheric conditions in some areas cause
low levels of CO to be present for long periods of time. In
fact, these "background" conditions may increase
CO to over the 10% COHb equivalency level, causing older CO
alarms to sound even though conditions inside the home are
not truly hazardous. However, newer alarms have been designed
to reduce sensitivities to compensate for these background
conditions. Treat all CO alarm warning sounds as real, until
it has been verified that there is no threat from equipment
inside the dwelling.
If you buy CO alarms:
- Select alarms listed by a qualified, independent testing
laboratory.
- Follow recommendations of NFPA 720 and manufacturer's recommendations
for placement in your home.
- Install CO alarms in a central location outside each separate
sleeping area in the immediate vicinity of the bedrooms. Each
alarm should be installed on the wall, ceiling, or other location
as specified by the manufacturer's instructions that accompany
the unit.
- Call your local fire department's non-emergency telephone
number. Tell the operator that you have purchased a CO alarm
and ask what number to call if the CO alarm sounds. Clearly
post that number by your telephone(s). Make sure everyone
in the household knows the difference between the fire emergency
and CO emergency numbers (if there is a difference).
- Test CO alarms at least once a month, following the manufacturer's
instructions.
- Replace CO alarms according to the manufacturer's instructions,
usually about every two to five years.
- Be aware that battery-powered CO alarms may have unique
battery packs designed to last approximately two years, compared
to batteries used in smoke alarms, which require yearly replacement.
|